Call Today

 

Nearly everybody will have their personal piece of advice with regards to How to Troubleshoot and Repair an Electric Water Heater.

Numerous modern houses use an electrical water heater for their heating system, due to its ease and also simplicity of use. Nevertheless, much like any other electrical appliances, problems might develop with its use, all of a sudden. It can be actually discouraging to get up to a cold shower instead of a warm one or having your bathroom with water that isn't warm sufficient or even too warm. Whatever the situation may be, hot water heater troubles can be fairly nerve-racking. The good news is, we have actually made a list of feasible options to your water heater issues. There are a variety of elements that could trigger a number of these problems, maybe a problem with the power supply, the electrical burner, or the thermostat. Before doing anything, guarantee you turn off the major power supply for security. Whatever the trouble is, getting it taken care of should not posture excessive of a concern if you comply with these steps:

 

Call An Expert:

If after replacing all malfunctioning components as well as resetting your temperature, the water heater still isn't functioning, you may require to get in touch with a specialist plumber for an expert point of view. The issue with your heating unit could be that the cold and hot taps have actually been switched or it might be undersized for the amount of warm water needed in your house. Whatever the situation might be, an expert plumber would aid resolve the trouble.

 

Inspect Your Power Supply:

As basic as this might seem, it is really required. Without appropriate power, your water heater will certainly not function. So the first thing to do when your water instantly stops working is to validate that it isn't a power issue. Examine if the fuse is blown out or the breaker tripped. If the breaker is the issue, just turn it off and on once more. Replace any kind of broken or damaged fuse. Test the appliance with power after these changes to see if it's now working.

 

Check Your Thermostat:

If your hot water heater still isn't working or the water coming out isn't warm enough, you might require to check the temperature level settings on your upper thermostat. Make certain the circuit breaker is turned off prior to doing anything. Open the gain access to panel and also press the red switch for temperature reset over the thermostat. This should assist warm the water. Transform the circuit breaker back on as well as examine if the problem has been solved.

 

Check the Heating Element in the Hot Water Heater:

If it's not a power trouble, then try looking into your heating element if it is still working. Check each of your burner to ensure the problem isn't with any of them. If any one of them is damaged, replace that part and after that inspect whether the warm water is back on.

 

Conclusion

Water heater problems are not always major. Much of them result from minor issues like a blown fuse or worn-out heating element. Changing the malfunctioning components must suffice. However, if you are still unable to resolve the issue, give a call to your nearby plumber ahead to get it dealt with.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

As an avid reader on How to Troubleshoot and Repair an Electric Water Heater, I imagined sharing that excerpt was worthwhile. Are you aware of somebody else who is inquisitive about the subject? Feel free to promote it. Thanks so much for your time spent reading it.

Quick, quality, call!